Beko Clothes Dryer DCU 8330 GX User Manual

Dryer  
DCU 8330 GX  
 
Important safety information  
1
This section includes safety information  
that will help protection from risks of  
personal injuries or materialistic damages.  
Failure to follow these instructions  
shall cause any warranty and reliability  
commitment to become void.  
• Do not use extension cords, multi-plugs  
or adaptors to connect the dryer to  
power supply in order to decrease the  
risk of electric shock.  
• Do not make any changes on the plug  
supplied with the product. If it is not  
compatible with the socket, have a  
qualified electrician change the socket  
with a suitable one.  
• Items cleaned or washed with gasoil/  
fuel oil, dry-laundry solvents and other  
combustible or explosive materials as  
well as the items that are contaminated  
or spotted with such materials should  
not be dried in the product since they  
emit flammable or explosive vapor.  
• Do not dry items cleaned with industrial  
chemicals in the dryer.  
• Do not dry unwashed items in the dryer.  
• Items soiled with cooking oils,  
acetone, alcohol, fuel oil, kerosene,  
stain remover, turpentine, paraffin and  
paraffin removers must be washed  
in hot water with plenty of detergent  
before being dried in the dryer.  
General safety  
• Never place the machine on a carpet-  
covered floor, otherwise, lack of airflow  
beneath the machine may cause  
electrical parts to overheat. This will  
cause problems with your machine.  
• If the power cable or mains plug is  
damaged, you must call Authorised  
Service Agent for repair.  
• The product should not be plugged  
in during installation, maintenance  
and repair works. Such works should  
always be made by the technical  
service. Manufacturer shall not be held  
responsible for damages arising from  
processes carried out by unauthorised  
persons.  
• Connect the product to a grounded  
outlet protected by a fuse of suitable  
capacity as stated in the technical  
specifications table.  
• Operate your product at temperatures  
between +5°C and +35°C.  
• Do not use electrical devices in the  
product.  
• Do not connect the air exit of the  
product to the chimney holes which  
are used for the exhaust fumes of the  
devices operating with gas or other  
types of fuel.  
• Garments or pillows bolstered with  
rubber foam (latex foam), shower  
bonnets, water resistant textiles,  
materials with rubber reinforcement and  
rubber foam pads should not be dried  
in the dryer.  
• Do not use fabric softeners and  
anti-static products unless they are  
recommended by the manufacturers of  
the fabric softener or the product.  
• Oil-affected items can ignite  
spontaneously, especially when  
You must provide enough ventilation  
in order to prevent gases exiting from  
devices operating with other types of  
fuels including the naked flame from  
accumulating in the room due to the  
back fire effect.  
exposed to heat sources such as in  
a tumble dryer. The items become  
warm, causing an oxidation reaction  
in the oil. Oxidation creates heat. If the  
heat cannot escape, the items can  
become hot enough to catch fire. Piling,  
stacking or storing oil-affected items  
can prevent heat from escaping and so  
create a fire hazard.  
• Always clean the lint filter before or after  
each loading.  
• Never operate your dryer without the  
lint filter installed.  
• If it is unavoidable that fabrics that  
contain vegetable or cooking oil or  
have been contaminated by hair care  
products be placed in a tumble dryer  
they should first be washed in hot water  
• Do not allow fibre, dust and dirt  
accumulation around the exhaust exit  
and at adjacent areas.  
• Power cable plug must be within easy  
reach after installation.  
 
3 EN  
with extra detergent - this will reduce,  
but not eliminate, the hazard.  
by following the information given in the  
safety instructions:  
• This product must be grounded.  
Grounding installation decreases the  
Turn off the machine, turn off and  
contact an authorised service agent.  
risk of electric shock by opening a path • Do not stop the dryer before the drying  
with low resistance for the electricity  
flow in case of a malfunction or failure.  
Power cable of this product is equipped  
with a conductor and a grounding  
plug that allows for grounding the  
product. This plug must be installed  
appropriately and inserted into a socket  
which is grounded in accordance with  
the local laws and regulations.  
cycle comes to an end unless you will  
remove all laundry from the dryer fast  
in order to lay them and dissipate the  
heat.  
• Remove the door of the drying  
compartment before decommissioning  
or disposing of the product.  
• The final step of the drying cycle (cool-  
down cycle) occurs without applying  
heat to ensure that the items are left  
at a temperature that will not damage  
them.  
• Fabric softeners or similar products  
should be used as specified by the  
fabric softener instructions.  
• Underwear that contains metal  
reinforcements should not be placed in  
a dryer. Damage to the dryer can result  
if metal reinforcements come loose  
during drying.  
• Do not install the product behind a door  
with a lock, sliding door or a door that  
has a hinge against the hinge of the  
dryer.  
• Do not install or leave this product  
in places where it will be exposed to  
outdoor conditions.  
• Do not tamper with the controls.  
• Do not perform any repair or part  
replacing procedures on the product  
even if you know or have the ability to  
perform unless it is clearly suggested  
in the operating instructions or the  
published service manual.  
• Inside and exhaust duct of the product  
must be cleaned by the qualified  
service personnel periodically.  
• Wrong connection of grounding  
conductor of the product can cause  
electric shock. If you have any suspect  
about the grounding connection, have  
it checked by a qualified electrician,  
service representative or service  
personnel.  
• Do not reach into the machine when  
the drum is spinning.  
• Unplug the machine when it is not in  
use.  
• Never wash down the appliance with  
water! There is the risk of electric shock!  
Always disconnect by unplugging from  
the mains before cleaning.  
• Never touch the plug with wet hands.  
Never unplug by pulling on the cable,  
always pull out by grabbing the plug  
only. Do not operate the machine if the  
power cable or plug is damaged!  
• Never attempt to repair the machine  
yourself, otherwise, you will be putting  
your life and others’ lives in danger.  
• For malfunctions that cannot be solved  
• Check all garments for forgotten  
lighters, coins, metal pieces, needles,  
etc. before loading.  
• Remove all objects from pockets such  
as lighters and matches.  
• At times when your dryer is not in  
use or after the laundry is taken out  
following the completion of drying  
process, turn off by using the On/  
Off button. In cases when the On/  
Off button is on (while the dryer is  
energized), keep the door of the dryer  
closed.  
Intended use  
• This product has been designed for  
domestic use. It should not be used for  
other purposes.  
• Use the product only for drying laundry  
that are marked accordingly.  
• Dry only those articles in your product  
that are stated in this manual.  
• This product is not intended to be  
used by persons with physical, sensory  
or mental disorders or unlearned  
or inexperienced people (including  
children) unless they are attended by  
a person who will be responsible for  
their safety or who will instruct them  
accordingly for use of the product.  
Download from Www.Somanuals.c4om.EANll Manuals Search And Download.  
Children’s safety  
• Electrical appliances are dangerous for  
the children. Keep children away from  
the machine when it is operating. Do  
not let them tamper with the machine.  
• Packaging materials are dangerous to  
children. Keep the packaging materials  
out of reach of children or dispose  
them by classifying according to waste  
directives.  
• Do not allow children sit/climb on or  
enter in the product.  
• Children should be supervised to  
ensure that they do not play with the  
product.  
• Close the loading door when you leave  
the area where the product is located.  
 
5 EN  
2 Installation  
Refer to the nearest Authorised Service  
Agent for installation of your product.  
C Preparation of location and electrical  
installation for the product is under  
customers responsibility.  
BInstallation and electrical connections  
must be carried out by a qualified  
personnel.  
A Prior to installation, visually check if the  
product has any defects on it. If so, do  
not have it installed. Damaged products  
will cause risks for your safety.  
Appropriate installation location  
• Install the product in an environment  
which has no risk of freezing and is in a  
stable and level position.  
A Make sure that you have removed  
the transportation safety assembly  
(nylon+styrofoam pieces) before using  
the product for the first time. Do not  
leave any items inside the drum.  
• Operate your product in a well  
ventilated, dust-free environment.  
• Do not block the air ducts in front of  
and under the product with materials  
such as long pile rugs and wooden  
bands.  
Under counter installation  
• A special part (Part no. 297 360 0100)  
replacing the top trim must be provided  
and installed by the Authorised Service  
Agent in order to use the machine under  
a counter or in a cupboard. It should  
never be operated without the top trim.  
• Leave at least 3 cm of space between  
the side and rear walls of the product  
and the walls of the counter/cupboard  
when installing your product under a  
counter or in a cupboard.  
Mounting over a washing machine  
• A fitting device should be used between  
the two machines when installing above  
a washing machine. The bracket (Part  
no. 297 720 0100 white/297 720 0400  
grey) must be installed by the Authorised  
Service Agent.  
• Do not place your product on a long  
pile rug or on similar surfaces.  
• Do not install the product behind a door  
with a lock, sliding door or a hinged  
door which can strike the product.  
• Once the product is installed, it should  
stay at the same place where its  
connections have been made. When  
installing the product, make sure  
that the rear wall of it does not touch  
anywhere (tap, socket, etc.) and also  
pay attention to install the product at a  
place where it will stay permanently.  
BDo not place the product on top of the  
power cable.  
• Keep at least 1.5 cm distance to walls  
of other furniture.  
• Place the product on a firm floor. If  
it will be placed on top of a washing  
machine, the approximate weight of  
both machines may reach 180 kg when  
they are full. Therefore, the floor must be  
capable of carrying the load on it!  
Removing the transportation  
safety assembly  
ARemove the transportation safety  
assembly before using the product for  
the first time.  
Connection to water drain;  
1. Open the loading door.  
In products equipped with a condenser unit  
the water accumulated during the drying  
cycle is collected in the water tank. You  
should drain the accumulated water after  
each drying cycle.  
2. There is a nylon bag inside the drum  
that contains a piece of styrofoam. Hold  
it from its section marked with XX.  
3. Pull the nylon towards yourself and  
remove the transportation safety  
assembly.  
You can directly send the accumulated  
water out through the water drain hose  
supplied with the machine instead of  
Download from Www.Somanuals.c6om.EANll Manuals Search And Download.  
periodically draining the water collected in CNever unscrew the adjustable feet from  
the water tank.  
Connecting the water drain hose;  
their housings.  
Electrical connection  
Connect the machine to a grounded outlet  
protected by a fuse of suitable capacity as  
stated in the technical specifications table.  
Our company shall not be liable for any  
damages that will arise when the machine  
is used on a circuit without grounding.  
• Connection must comply with national  
regulations.  
• If the current value of the fuse or  
breaker in the house is less than 10  
Amps, have a qualified electrician install  
a 10 Amp fuse.  
• Power cable plug must be within easy  
reach after installation.  
• The voltage and allowed fuse or  
breaker protection are specified in the  
Technical Specifications” section.  
• The specified voltage must be equal to  
your mains voltage.  
1. Remove the hose on the machine by  
pulling it out from its end. Do not use  
any tools to take out the hose.  
• Do not make connections via extension  
cables or multi-plugs.  
2. Connect the special drain hose supplied  
with the machine to the pipe fitting.  
3. The other end of the drain hose can be  
directly connected to the wastewater  
drain or to the washbasin. The fitting  
must always be secured in all types of  
connections. Your house may be flooded  
if the hose gets out of its housing during  
water discharge.  
• The main fuse and switches must have  
a contact distance of minimum 3 mm.  
BDamaged power cable must only be  
replaced by a qualified electrician.  
BIf the product is faulty, it must not be  
operated unless it is repaired! There is  
the risk of electric shock!  
First use  
Important:  
To have the product ready for operation  
before calling the authorised service  
agent, make sure that its location  
and power supply installations are  
appropriate. If they are not, call a  
qualified electrician to have any  
necessary arrangements carried out.  
• Make sure that the power connections  
of the product are in accordance  
with the instructions given in relevant  
chapters of this manual.  
• The hose should be attached to a height  
of maximum 80 cm.  
You must be careful not the pinch or  
bend the hose.  
• The end of the hose should not be bent,  
it should not be stepped on and it must  
not be folded between the drain and the  
machine.  
Adjusting the feet  
In order to ensure that your machine  
operates more silently and vibration-free, it  
must stand level and balanced on its feet.  
Balance the machine by adjusting the feet.  
Rotate the feet to adjust until the machine  
stands level and firmly.  
Disposing of packaging material  
Packaging materials are dangerous to  
children. Keep packaging materials in  
a safe place out of reach of children.  
Packaging materials of your product are  
manufactured from recyclable materials.  
Sort and dispose of them in accordance  
with recycled waste instructions. Do not  
dispose of them with normal domestic  
waste.  
 
7 EN  
Transportation of the machine  
1. Unplug the machine from the mains.  
2. Remove the water drain (if any) and  
chimney connections.  
3. Drain water remained in the machine  
completely before transportation.  
Disposing of the old machine  
Dispose of your old machine in an  
environmentally friendly manner.  
Refer to your local dealer or solid waste  
collection centre in your area to learn how  
to dispose of your machine.  
Before disposing of your old machine,  
cut off the power cable plug and make  
the loading door lock unusable to avoid  
dangerous conditions to children.  
Technical specification  
EN  
2
Height (adjustable)  
Width  
84.6 cm  
59.5 cm  
59.8 cm  
8 kg  
Depth  
Capacity (max.)  
Weight (net)  
40,5 kg  
Voltage  
Rated power input  
Model code  
See type label  
Type label is located behind the loading door.  
Download from Www.Somanuals.c8om.EANll Manuals Search And Download.  
3 Initial preparations for drying  
programme.  
Things to be done for energy  
saving:  
• Make sure that you operate the product  
at its full capacity but pay attention to  
not exceeding it.  
A B C D  
Low  
• Spin your laundry at the highest speed  
possible when washing them. Thus,  
the drying time is shortened and energy  
consumption is decreased.  
l n m  
o p q  
• Pay attention to dry same types of  
laundry together.  
• Follow the instructions in the user  
manual for programme selection.  
• Make sure that sufficient clearance  
is provided at the front and rear side  
of the dryer for air circulation. Do not  
block the grill at the front side of the  
product.  
• Do not open the door of the machine  
during drying unless necessary. If you  
must certainly open the door, pay  
attention not to keep it open for a long  
time.  
Laundry unsuitable for drying in  
the machine  
Laundry items with metal attachments  
such as belt buckles and metal buttons  
can damage your dryer.  
• Do not add new (wet) laundry during  
drying.  
• Lint and fibres released from the  
laundry to the air during the drying  
cycle are collected in the “Lint Filter”.  
Make sure that you clean the filters  
before or after each drying.  
• In models with condenser, make sure  
that you clean the condenser regularly  
at least once every month or after every  
30 drying cycles.  
• In vented models, follow the chimney  
connection rules in the user manual  
and pay attention to the chimney  
cleaning.  
• Ventilate the room, where the dryer is  
located, well during drying.  
• Do not dry items such as woollens, silk  
garments and nylon stockings, delicate  
embroidered fabrics, laundry with metal  
accessories and items such as sleeping  
bags in the dryer.  
• Laundry made of delicate and valuable  
fabrics as well as lace curtains can be  
creased. Do not dry them in the dryer!  
• Do not dry items made of hermetic  
fibres such as pillows and quilts in the  
dryer.  
• Laundry made of foam or rubber will be  
deformed.  
• Do not dry laundry containing rubber in  
the dryer.  
• Do not dry laundry exposed to  
petroleum, oil, combustible or explosive  
agents in the dryer even if they are  
washed beforehand.  
• Overly wet laundry or laundry with  
dripping water must not be put into the  
dryer.  
• For power saving in models with lamps,  
at times when your dryer is not in  
use, keep the door closed if the On/  
Off button is pressed (if the dryer is  
energized).  
Laundry suitable for drying in the  
machine  
• Items cleaned or washed with gasoil/  
fuel oil, dry-laundry solvents and other  
combustible or explosive materials as  
well as the items that are contaminated  
or spotted with such materials should  
C Always follow the suggestions on the  
laundry labels. Dry only the laundry  
having a label stating that they are  
suitable for drying in a dryer and make  
sure that you select the appropriate  
 
9 EN  
not be dried in the product since they  
emit flammable or explosive vapor.  
• Do not dry items cleaned with industrial  
chemicals in the dryer.  
• Do not dry your unwashed laundry in the  
dryer.  
Correct load capacity  
• Items soiled with cooking oils, acetone,  
alcohol, fuel oil, kerosene, stain remover,  
turpentine, paraffin and paraffin removers  
must be washed in hot water with plenty  
of detergent before being dried in the  
dryer.  
• Garments or pillows bolstered with  
rubber foam (latex foam), shower  
bonnets, water resistant textiles,  
materials with rubber reinforcement and  
rubber foam pads should not be dried in  
the dryer.  
• Do not use fabric softeners and  
anti-static products unless they are  
recommended by the manufacturers of  
the fabric softener or the product.  
• Do not dry the underwear reinforced with  
metal parts in the dryer. If these metal  
reinforcements loosen and break during  
drying, they will damage your dryer.  
Preparing laundry for drying  
Check all laundry items before loading  
them into the product to make sure that  
there are no lighters, coins, metal items,  
needles and etc. in their pockets or on  
any part of them.  
A Consider the information in the  
"Programme Selection Table". Always  
start the programme in accordance  
with the maximum load capacity.  
C Adding laundry to the machine more  
than the level shown in the figure is not  
recommended. Drying performance  
will degrade when the machine is  
overloaded. Furthermore, your dryer  
and your laundry can be damaged.  
C Place your laundry into the drum  
loosely so that they will not get tangled.  
CLarge pieces (E.g.: bed sheets, quilt  
covers, large tablecloths) may bunch-  
up. Stop the dryer 1-2 times during  
drying process to separate bunched-  
up laundry.  
• Fabric softeners and similar products  
must be used in accordance with the  
instructions of the manufacturer of the  
relevant products.  
• All laundry must be spun at the highest  
spin speed that your washing machine  
allows for the laundry type.  
• Laundry may be tangled after washing.  
Separate your laundry before placing  
them into your dryer.  
• Sort your laundry according to their types  
and thicknesses. Dry the same type of  
laundry together. E.g.: fine kitchen towels  
and table cloths dry faster than the thick  
bath towels.  
Download from Www.Somanuals1.c0om.EANll Manuals Search And Download.  
Following weights are given as examples.  
Loading the laundry  
1. Open the loading door.  
2. Place the laundry in the machine  
without compressing.  
Approximate  
Home articles  
weights (g)  
Cotton quit covers  
(double)  
3. Push the loading door to close.  
A Ensure that no items are caught in the  
door.  
1500  
Cotton quit covers (single) 1000  
Bed sheets (double)  
Bed sheets (single)  
Large tablecloths  
Small tablecloths  
Tea napkins  
500  
350  
700  
250  
100  
700  
350  
Bath towels  
Hand towels  
Approximate  
weights (g)  
Garments  
Blouses  
Cotton shirts  
Shirts  
Cotton dresses  
Dresses  
Jeans  
150  
300  
200  
500  
350  
700  
Handkerchiefs (10 pieces) 100  
T-Shirts 125  
 
11 EN  
4 Selecting a Programme and OperatingYour Machine  
Control panel  
1
2
3
4
5
Shirts  
Xpress 35  
Jeans  
Daily  
Iron Dry  
Synthetics  
Cottons  
Wool  
Cupboard  
Dry  
Refresh  
Spin / Time  
Time Delay  
Mix  
Iron Dry  
Cupboard  
Dry  
Start/Pause  
Sport  
Babycare  
Delicates  
Extra Dry  
On / Off  
Freshen Up  
Cancel Press  
& Hold 3 sec.  
Timer  
Programmes  
Buzzer  
Cancel  
Dryness  
Level  
Anti-  
Creasing  
9
8
7
6
1. Washing machine spin speed*/Timer pro-  
gramme selection  
5. On/Off button  
Used to turn on and off the machine.  
6. Anti-creasing  
Spin speed used to spin the laundry in the  
washing macthine / Indicates the time for  
timer programs.  
Prevents the laundry from creasing after the  
machine completes its programme.  
7. Dryness level  
2. Display  
Indicates the status of the machine.  
3. Start/Pause/Cancel button  
Used to start, pause or cancel the  
programme.  
Used to adjust the required dryness level.  
8. Cancel audio warning  
Used to cancel the audio warning given at  
the end of the programme.  
4. Programme selection knob  
Used to select a programme.  
9.Time delaying buttons  
Used to set the time delay.  
Child-proof lock warning icon  
Time delaying mode  
Spin speed / Timer programmes  
Operation icon  
Door open warning icon  
Anti-creasing mode  
Pause icon  
Water tank full warning icon  
Filter cleaning warning icon  
Condenser cleaning warning icon  
Remaining time indicator  
Audio warning level / Cancel audio warning  
Drying degree  
Anti-creasing is activated  
Spin speed is used to show the remaining time more accurately.  
It does not affect the performance of your machine.  
Download from Www.Somanuals1.c2om.EANll Manuals Search And Download.  
Iron dry  
Ventilation  
Anti  
Creasing  
CupboardCupboard  
Cottons Synthetics  
Ekstra  
dry  
Express  
35’  
Timer  
dry  
programs  
dry plus  
Child-proof  
lock  
Buzzer/ On/Off  
cancel  
Start  
pause  
cancel  
Tank  
full  
Dryness  
Level  
Filter  
Daily  
Jeans  
Shirt  
Spin  
cleaning  
Timer  
Delay  
Wool  
Refresh  
Babycare Sport  
Mixed  
End/anti-  
creasing  
Drying  
Drying  
Rack  
Delicates  
C For further programme details, see,  
"Programme Selection Table"  
Main programmes  
Depending on the type of laundry, the  
following main programmes are available:  
•Cottons  
Preparing the machine  
1. Plug in your machine.  
2. Place the laundry in the machine.  
3. Press the “On/Off” button.  
C Pressing the “On/Off” button does not  
necessarily mean that the programme  
has started. Press “Start/Pause/  
Cancel” button of the machine to start  
the programme.  
You can dry your durable laundry with this  
programme. Dries at high temperature. It  
is recommended to use for your cotton  
items (such as bed sheets, quilt cover,  
underclothing, etc.).  
Programme selection  
Decide the appropriate programme from  
the table below which includes drying  
temperatures in degrees. Select the  
desired programme with the programme  
selection knob.  
•Synthetics  
You can dry your less durable laundry  
with this programme. It dries at a lower  
temperature compared to the cottons  
programme. It is recommended for your  
synthetic laundry (such as shirts, blouses,  
synthetic/cotton blended laundry, etc.).  
C Do not dry curtains and lace in your  
machine.  
Drying at high  
temperature only for  
cotton laundry. Thick  
and multi layered  
laundry (E.g.: towels,  
linens, jeans) are dried  
in a way that they do  
not require ironing  
before placing in the  
wardrobe.  
Special programmes  
Extra dry  
For special cases, there are also extra  
programmes available:  
C Additional programmes may differ  
according to the model of your  
machine.  
•Xpress 35  
Normal laundry (E.g.:  
tablecloths, underwear)  
are dried in a way that  
they do not require  
ironing before placing  
in the wardrobe.  
You can use this programme to dry your  
cotton laundry that you have spun at high  
speeds in your washing machine.This  
program dries 1,5 kg cotton laundry (2  
Shirts / 5 T-shirts) in 35 minutes.  
C To obtain better results from your  
dryer, your laundry must be washed  
at suitable programmes and spun at  
the recommended spin speeds in the  
washing machine.  
Cupboard  
dry  
Normal laundry (E.g.,  
Shirts, dresses) are  
dried ready to be  
ironed.  
Iron dry  
 
13 EN  
•Shirt  
this programme.  
This programme dries the shirts more  
sensitively and creases them less and  
thus, helps to iron them more easily.  
C There may be a little humidity on your  
shirts at the end of the programme. We  
recommend you not to leave the shirts  
in the dryer.  
•Timer programs  
•Jeans  
You can use this programme to dry your  
jeans that you have spun at high speeds in  
your washing machine.  
C Review the relevant section in the  
programme table.  
You can select one of the 10 min., 20  
min., 30 min., 40 min., 50 min., 60 min.,  
80 min., 100 min., 120 min., 140 min.  
and 160 min. timer programmes to  
achieve the desired final drying level at  
low temperatures. Programme dries at  
the selected time regardless of the drying  
temperature.  
•Mixed  
Used to dry synthetic and cotton laundry  
that do not release colour. Used for  
laundry that is suitable for drying.  
•Sport  
Used to dry the laundry that are made  
of synthetic, cotton or mixed fabrics and  
have a tag indicating that they are suitable  
for drying.  
Time display  
The display shows the time remaining  
for the programme to complete while a  
programme is running. Time is displayed  
in hours and minutes as “02:30”. The  
exemplary display image shows the dryer  
when it is running and child-proof lock is  
active.  
•Wool Refresh  
You can use this function to ventilate  
and soften your woolen laundry that can  
be washed in the washing machine. Do  
not use this function to dry your laundry  
completely. Take out your laundry and  
ventilate them immediately after the  
program is over.  
CProgramme duration may differ from the  
values in the consumption table subject  
to the changes in the water hardness  
and temperature, ambient temperature,  
type and amount of laundry, auxiliary  
functions selected, and changes in the  
supply voltage..  
•Daily  
This programme is used to dry cottons  
and synthetics daily, and lasts for 1 hour.  
•Babycare  
This programme is used for baby clothes  
that bear machine dryable approval on its  
label.  
•Delicates  
You can dry your highly delicate laundry  
that are suitable for drying or laundry which  
is advised to be hand-washed at a lower  
temperature.  
C It is recommended to use a cloth bag  
to prevent certain delicate laundry from  
getting creased or damaged. Take your  
laundry immediately out of the dryer  
and hang them after the programme  
ends in order to prevent them being  
creased.  
•Freshen Up  
Only ventilation is performed for 10  
Tminutes without blowing hot air. You can  
air your clothes that have been kept at  
closed environments for a long time and  
deodourise unpleasant odours thanks to  
Download from Www.Somanuals1.c4om.EANll Manuals Search And Download.  
Programme selection and consumption table  
Programme table  
EN  
Approximate  
Spin speed in  
Capacity  
amount of Drying time  
Programs  
washing machine  
(rpm)  
(kg)  
remaining  
humidity  
(minutes)  
Cottons / Coloreds  
Extra dry  
8
8
8
1000  
1000  
1000  
% 60  
% 60  
% 60  
154  
142  
120  
A
Cupboard dry  
Iron dry  
A
A
Xpress 35’  
Shirt  
1,5  
1.5  
4
1200  
1200  
1200  
1000  
1000  
600  
%50  
%50  
%50  
%60  
%60  
%50  
%50  
%60  
35  
45  
90  
90  
100  
6
Jeans  
Mixed  
4
Sport  
4
Wool Refresh  
Daily  
1.5  
4
1200  
1000  
72  
80  
Babycare  
Synthetics  
3
Cupboard dry  
4
2
800  
600  
% 40  
% 40  
60  
45  
B
Delicates  
Cupboard dry  
B
Energy consumption values  
Capacity Energy consumption value kWh Energy rat-  
Programs  
(kg)  
per year  
ing star  
Cottons-Extra Dry*  
8
350  
2
* : Energy Label standard program (AS/NZS 2442)  
All values given in the table have been fixed according to standard laboratory conditions.  
These values may deviate from the table according to the laundry type, laundry spin  
speed, environmental conditions and voltage fluctuations.  
 
15 EN  
Auxiliary function  
Changing the contrast  
Audio Warning  
Contrast can be adjusted in order to  
make the symbols on the display appear  
clearer. It may particularly be necessary to  
change the contrast setting of the display  
when the dryer is installed over a washing  
machine.press and  
Cancel  
audio warning  
Audio warning Audio warning  
level 1 level 2  
Audio warning  
level 3  
Your dryer will give an audio warning when  
the programme comes to an end. If you  
do not want to hear this buzzing or want  
to change the volume level, you need to  
press the “Volume level” button. No audio  
warning will be given when “x” appears on  
the screen.  
Press and hold the Spin Speed/Time  
button for 3 seconds.  
When the contrast is changed at the end  
of 3 seconds, all symbols on the display  
will become visible for 3 seconds in order  
to indicate that the process is complete.  
Perform the same procedure to revert  
back to the previous contrast setting.  
C You can select this function either  
before or after the programme starts.  
Warning indicators  
Drying degree  
C Warning indicators may differ according  
to the model of your machine.  
Filter cleaning  
Used to adjust the required dryness level.  
More drying is performed compared to  
the default settings when “+” sign appears  
and less drying is performed when “-” sign  
appears. Programme duration can change  
depending on the selection.  
A warning symbol will appear to remind  
filter cleaning after the programme finishes.  
C f the filter cleaning symbol flashes  
continuously, please refer to  
“Suggested solutions for problems”.  
Water tank  
A This function must be selected before  
the programme starts.  
Anti-creasing  
A warning symbol will turn on at the end  
of the programme or when the tank is full  
with water. The machine stops operating  
if the warning symbol turns on when a  
programme is running. To restart the  
machine, please drain the water in the  
water tank. Press “Start/Pause/Cancel”  
button to start the programme after you  
have emptied the water tank. The warning  
symbol turns off and the programme  
resumes operating.  
A 2-hour anti creasing programme to  
prevent laundry from creasing will be  
activated if you do not take the laundry  
out after the programme is over. This  
programme rotates the laundry in  
600-second intervals to prevent creasing.  
Press “Anti-creasing” button to activate.  
Anti-creasing is activated but the  
programme is running in the first  
exemplary figure. Drying is over and the  
first step of anti-creasing has started in the  
second figure.  
Cleaning the condenser  
Warning symbol turns on with certain  
Download from Www.Somanuals1.c6om.EANll Manuals Search And Download.  
intervals to remind that the condenser  
needs cleaning.  
set the desired time delay.  
3. Press “Start/Pause/Cancel” button. The  
Time delay symbol lights up. Pause  
symbol fades. Start symbol lights up.  
4. The “:” in the middle of the displayed  
time delay will start flashing.  
Door open  
Canceling the time delay  
If you want to cancel the time delay  
countdown and start the programme  
immediately:  
Dryer door open symbol lights up.  
1. Press “Start/Pause/Cancel” button for 3  
seconds to cancel the programme.  
2. Then, press “Start/Pause/Cancel”  
button to start the desired programme.  
Starting the programme  
1. Press “Start/Pause/Cancel” button to  
start the programme.  
2. “Start/Pause” symbol will light up  
to indicate that the programme has  
started and “:” symbol between the  
remaining time will continue flashing.  
Progress of programme  
Time delay  
With the “Time delay” function you can  
delay the programme start up to 24 hours.  
1. Open the loading door and put the  
laundry in.  
2. Set the drying programme and spin  
speed, and if required, select the  
auxiliary functions.  
3. Press “Time delaying” buttons “+” and  
“-” to set the desired time delay. The  
time delay symbol will flash.  
Anti-  
creasing  
Drying  
Wardrobe  
(Extra)  
Iron  
Ventilation  
4. Press “Start/Pause/Cancel” button.  
Then the time delay starts to count  
down. The Time delay symbol lights up.  
Start symbol lights up.  
The progress of a running programme is  
shown through a number of symbols on  
the screen.  
At the beginning of each programme  
step, the relevant symbol in the series  
of symbols will light up and thus, all  
symbols will remain lit up at the end of  
the programme. The symbol that is lit up  
at the far right of the series of symbols  
indicates the step that is being carried out.  
“Drying”:  
The “:” in the middle of the displayed time  
delay will start flashing.  
More laundry may be loaded or taken out  
during the time delay period. At the end of  
the time delay countdown process, time  
delay symbol fades, drying process starts  
and the programme duration is displayed.  
The time on the display is the total of  
normal drying time and delay time.  
Time delay is started by pressing the start/  
pause/cancel button in the exemplary  
figure.  
- Lights up in all programmes apart from  
drying and ventilation.  
“Iron Dry”:  
- Starts to illuminate when the drying  
degree reaches “iron dry” step and remains  
illuminated until the next step.  
“Cupboard Dry”:  
Changing the delay time  
If you want to change the time during the  
countdown:  
Starts to illuminate when the drying degree  
reaches “wardrobe dry” step, and remains  
illuminated until the next step.  
“Extra Dry”:  
1. Press “Start/Pause/Cancel” button for  
3 seconds to cancel the programme.  
Time delay function must be set again  
for the required time.  
Starts to illuminate when the drying degree  
reach to “wardrobe dry extra” step.  
“Ventilation”:  
2. Press Time delay buttons “+” or “-” to  
- Illuminates when the programme ends.  
 
17 EN  
C Anti-creasing icon will light up at the  
end of the programme if anti-creasing  
function is active.  
Therefore, it is recommended to add  
laundry before the drying programme  
has started.  
C If you select a new programme by  
turning the programme selection knob  
while your machine is in standby,  
then the current program is cancelled  
and new programme information is  
displayed.  
Changing the programme after the  
programme has started  
You can use this feature to dry your laundry in a  
different program after your machine has started  
to run.  
Child-proof lock  
There is a child-proof lock to prevent  
any programme interruption due to the  
pressing of button while the programme is  
running. The loading door and all button  
except the “On/Off” button on the panel  
are deactivated when the child-proof lock  
is active.  
In order to activate the child-proof lock,  
press on the “audio warning” and “anti-  
creasing” buttons simultaneously for 3  
seconds.  
For example;  
Press and hold the “Start/Pause/Cancel”  
button for about 3 seconds to “Cancel”  
the programme in order to select “Extra  
Dry” programme instead of “Iron Dry”  
programme. Select the “Extra Dry”  
program by rotating the program knob.  
Press “Start/Pause/Cancel” button to start  
the program.  
To start a new programme after the  
programme is over or to interrupt the  
programme, the child-proof lock should be  
deactivated. Press the same buttons for  
3 sec. again to deactivate the child-proof  
lock.  
CIf you select a new programme by  
turning the programme selection knob  
while your machine is running, then the  
current program is cancelled and new  
programme information is displayed.  
Lock symbol will appear on the screen  
when the child-proof lock is activated.  
Adding/removing laundry in  
standby mode  
In order to add or take out laundry after  
the start-up of the programme;  
1. Press the “Start/Pause/Cancel” button  
to switch the machine to “Pause”  
mode. Drying process will stop.  
2. Open the door at Pause position and  
close it again after adding or taking out  
laundry.  
C Child-proof lock will also be deactivated  
when the machine is restarted by  
pressing the on/off button.  
When the child-proof lock is activated:  
• Display icons will not change even if the  
position of programme selection knob  
is changed while the machine is running  
or in halt.  
• If the child-proof lock is deactivated  
after changing the position of the  
programme selection knob while your  
machine is running, your machine stops  
and new programme information is  
displayed  
3. Press “Start/Pause/Cancel” button to  
start the program.  
C Any laundry added after the drying  
process was started may cause the  
already dried clothes in the machine  
intermingle with wet clothes and the  
result will be wet laundry after the  
drying process is over.  
CLaundry may be added or taken out  
as much as desired during a drying  
process, but as this process will  
interrupt drying continuously, it will  
extend the program duration and  
increase energy consumption.  
Download from Www.Somanuals1.c8om.EANll Manuals Search And Download.  
Ending the programme through  
canceling  
A new program can be selected and  
started after “Program cancel” is activated  
in order to change the drying program.  
To cancel any selected programme:  
Press “Start/Pause/Cancel” button for  
about 3 seconds. “Lint filter cleaning” and  
“Water tank” warning symbols light up and  
“End” label appears on the screen as a  
reminder at the end of this period.  
A As the inside of the machine will be  
excessively hot when you cancel the  
program while the machine is running,  
activate the ventilation program to cool  
it down.  
C If you change the position of  
programme selection knob while your  
machine is running, then the machine  
stops, current programme is cancelled  
and new programme information is  
displayed.  
End of programme  
“Filter cleaning” and “Water tank” warning  
symbols light up and “End” label appears  
on the screen in the programme follow-  
up indicator when the programme ends.  
The door can be opened and the machine  
becomes ready for a second cycle.  
Press “On/Off” button to turn off the dryer.  
C When selected, the 2-hour anti creasing  
programme will be activated to prevent  
laundry from creasing if you do not take  
the laundry out after the programme  
has come to an end.  
C Clean the filter after each drying (please  
see, Filter cleaning).  
C Drain the water tank after each drying  
(please see, Water tank)  
 
19 EN  
5 Maintenance and cleaning  
Filter Cartridge / Door Inner  
Surface  
Lint and fibres released from the laundry to  
the air during the drying cycle are collected  
in the “Filter Cartridge”.  
Sensor  
C Such fibre and lint are generally formed  
during wearing and washing.  
C Always clean the filter and the inner  
surfaces of the cover after each drying  
process.  
C You can clean the filter and filter area by  
vacuum cleaner.  
To clean the filter:  
1. Open the loading door.  
2. Remove the cover filter by pulling it up  
and open the filter.  
3. Clean lint, fibre, and cotton raveling by  
hand or with a soft piece of cloth.  
4. Close the filter and place it back into its  
seat.  
C Clogging may arise on the filter surface  
after using your machine for some time;  
if this occurs, wash the filter with water  
and dry it before using again.  
There are humidity sensors in your dryer  
that detect whether the laundry is dry or  
not.  
To clean the sensor:  
1. Open the loading door of the dryer.  
2. Allow the machine to cool down if  
drying has been carried out.  
3. Wipe the metal sensors with a soft  
cloth, dampened with vinegar and dry  
them.  
C Clean metal sensors 4 times a year.  
A Never use solvents, cleaning agents  
or similar substances when cleaning  
since these materials can cause fire and  
explosion!  
C Clean the entire inner surface of the  
cover and door gasket.  
Download from Www.Somanuals2.c0om.EANll Manuals Search And Download.  
1. If a drying process has been carried out,  
open the door of the machine and wait  
until it cools down.  
Water tank;  
The moisture in the damp laundry is taken  
from the laundry and condens ed. Drain  
the water tank after each drying cycle or  
during drying when “Water tank” warning  
light turns on.  
A Condensed water is not drinkable!  
A Never take out the water tank when the  
programme is running!  
If you forget to drain the water tank, your  
dryer will stop during the following drying  
cycles when the water tank is full and the  
“Water tank” warning light will turn on. If  
this is the case, press the “Start/Pause/  
Cancel” button to resume the drying cycle  
after draining the water tank.  
2. Unlock the 2 condenser locks after  
opening the kick plate.  
*To drain the water tank:  
1-Pull the drawer and remove the water  
tank carefully.  
3. Pull out the condenser.  
2-Drain the water in the tank  
4. Clean the condenser by applying  
pressurized water with a shower  
armature and wait until the water  
drains.  
3-If there is lint accumulation in the funnel  
of the water tank, clean it under running  
water.  
4-Place the water tank into its seat.  
For the condenser;  
Hot and humid air in the condenser is  
cooled with the cold air from the room.  
Thus, the humid air circulating in your  
dryer is condensed and then pumped into  
the tank.  
C Clean the condenser after every 30  
drying cycles or once a month.  
To clean the condenser:  
 
21 EN  
5. Place the condenser in its housing.  
Fasten the 2 locks and make sure that  
they are seated securely.  
6. Close the kick plate cover.  
Download from Www.Somanuals2.c2om.EANll Manuals Search And Download.  
6 Suggested solutions for problems  
Drying process takes too much time  
• Meshes of the filter may be clogged. Wash with water.  
Laundry comes out wet at the end of drying.  
• Meshes of the filter may be clogged. Wash with water.  
• Excessive laundry might have been loaded in. Do not load the dryer in excess.  
Dryer does not switch on or the programme does not start. Dryer is not activated  
when set.  
• It might have not been plugged in. Make sure that the machine is plugged in.  
• The loading door may be ajar. Make sure that the loading door is properly closed.  
• Programme might have not been set or the "Start/Pause/Cancel" button might  
have not been pressed. Make sure that the programme has been set and it is not  
in “Pause” mode.  
• "Childproof lock" might have been activated. Deactivate the childproof lock.  
Programme has been interrupted without any cause.  
• The loading door may be ajar. Make sure that the loading door is properly closed.  
• Electricity may be cut off. Press "Start/Pause/Cancel" button to start the  
programme.  
Laundry has shrunk, become felted or deteriorated.  
• A programme suitable for the laundry type might have not been used. Dry only  
the laundry which is suitable for drying in dryer after checking the labels on your  
clothes.  
• Select a programme with suitable low temperature for the laundry type to dry your  
clothes.  
Drum lightning does not come on.  
• Dryer might have not been started by using the "On/Off" button. Make sure that  
the dryer is on.  
• Bulb may have blown. Call the authorized service to replace the bulb.  
“Final / Anti-creasing” symbol flashes.  
• The 2-hour anti creasing programme to prevent laundry from creasing might have  
been activated. Turn off the dryer and take out the laundry.  
“Final / Anti-creasing” symbol is on.  
• Programme has come to an end. Turn off the dryer and take out the laundry.  
Water comes out the cover.  
• Clean the entire inner surface of the cover and door gasket.  
Cover opens spontaneously.  
• Push it until you hear that it is closed.  
For products with a condenser:  
“Water tank” warning symbol is on.  
• Water may be full.  
• Anti-creasing programme might be running. Drain the water in the tank.  
“Filter cleaning” symbol is on.  
• Filter might have not been cleaned. Clean the cover filter.  
 
23 EN  
“Condenser cleaning” symbol is on.  
• Filter drawer/Condenser might have not been cleaned. Clean the filters in the  
condenser/filter drawer under the kick plate.  
A Call an authorised service if the problem persists.  
Download from Www.Somanuals2.c4om.EANll Manuals Search And Download.  

3Com Cell Phone 3C10408A User Manual
888 Digital Video Games S136 User Manual
AdobeAir Humidifier P500A User Manual
Advantech Computer Hardware Intel User Manual
Amana Microwave Oven ACM1460A User Manual
AMD Computer Hardware GA M61SME S2 User Manual
ATI Technologies Tiller 365 User Manual
Axis Communications Home Security System M1124 E User Manual
BB Electronics Network Card 232OPDRI User Manual
Behringer Music Pedal UF300 User Manual